Wuhan Questt ASIA Technology Co., Ltd.
Focus on laser application for 22 years Creat personalized intelligent machines
Add to Cart
200W Laser Welding Machine for Mould Repairing Diamond Rod YAG Diode Laser 100 J
Introduction
Robot300M laser welding machine for mould repairing is is especially designed for the mould industry,which is applied to repair precision moulds.
The mould repairing can make full use of the original moulds, which will greatly reduce the production cost, and improve the working efficiency. The technology can also be applied to modification of mould design or size, thus reducing the development cycle of the product.
By controlling laser width, energy, top power and repitition frequency to melt workpieces , form a special melting pool, the processing type is heat transmission, processing work pieces surface by laser radiation , heat transmit from surface to bowel.
Machine Advantages
1. The ceramic focusing cavity is corrosion and high temperature resistant, and the service life is 8 to 10 years, while the service life of the xenon lamp is over 8 million times.
2. World-leading automatic light shielding system is employed to remove stimulation of light on eyes during operation.
3. The laser head can be turned for 360 degrees, and the whole optical path can be turned 360 degrees too, up and down by motor,front and after adjustable, especially suitable for repair of large, medium and small-sized moulds.
4. Intelligent remote controllers are employed for adjusting parameters, with simple and convenient operation.
5. The workbench can be adjusted up and down with three-dimensional moving.
6. The light spots can be adjusted in size.
7. Imported X lamp and rod
8. High quality optical system
9. Big flow water chiller for cooling system
10. Electrical up and down table for focus
Specification data sheet
Laser Welding Jewelry Machine For Mould Repairing.pdf
| type | Robot200 | |
| Output laser power | 300W | |
| Energe | 60-120 J | |
| Wave length | 1064nm | |
| Laser power supply | 4KW | |
| Laser welding minimum melt pool | 0.1mm | |
| Laser pulse frequency | ≤50Hz | |
| Laser pules width | ≤20ms | |
| Port adjusting scope | 0.1～3.0mm | |
| Port size | 0.2～3.0mm | |
| Protective gas | N2 | |
| Power demand | 220V one-phase/50Hz/20A | |
| Figure size of system | Laser welder | 1160X640X1410mm |
| Water chiller | 740X600X1090mm | |
Consumable
| Item | Specification | Quantity consume of one year | Photo |
| Imported Xenon Lamp | 1.8 million times` lighting 2.12 month lifetime 3.material imported | 2-6 pcs | |
| Imported Protection lens | 1.6-12 months lifetime 2.material imported | 2-4pcs |
Applications
It is applicable to metallic materials such as cold working high alloy steel, hot forging high alloy steel, nickel tool steel, high grade steel, copper alloy, beryllium steel, and high flexibility aluminum alloy. The remote controller or the touch operation panel can be used to select the laser output power, frequency, pulse width and other parameters. The moving speed of the workbench can be set to manipulate the workbench moving, so that the welding parameters match the welding requirements, and thus producing optimal effect of smooth welding joints and points.
Laser source
Machine outlook
FAQ
1 Q: What is the warranty of the machine?
A: The warranty is 1 year, but whole life after-sale service.
2 Q: What is the payment term?
A: T/T, L/C, Westen Union, etc.
3 Q: What is the service
A: Engineers can offer oversea services .
4 Q: How about the quality?
A: Germany high technoloy.
5 Q: How is the operation?
A: We offer operation manual and videos.